红旗站建标准体系之安全工器具标准化管理.doc

红旗站建设标准体系之安全工器具标准化管理 一、适用范围 1、文中条例规定了重庆市电力公司涪陵电力实业股份公司桥南变电站安全工器具工作的相关事宜。 2、本文适用于重庆市电力公司涪陵电力实业股份公司桥南变电站安全工器具工作相关人员。 二、引用标准： 1、《国家电网公司变电站管理规范》 2、《重庆市电力公司变电站运行管理规范》 3、《重庆市电力公司变电运行规程》 4、《国家电网公司十八项电网重大反事故措施》 三、管理规范： 组织体系： 公司建立变电站安全员——运管中心安全专责——安保部变电专责的安全工器具三级管理体系。全面负责变电站内措施的检查和维护工作，并对措施落实情况负责。???安全工器具检查维护工作行为标准：维护工作至少应由两人进行。会同其他人员共同赴现场进行对照，逐项检查每检查完一项，应立即在“检查维护卡”相应栏内打“√”或打“×”，全部工作完毕将检查结果简要记入检查维护卡内的“记事”栏。 of vision. 3, build, fitting in with the urban master plan in Yibin city rapid rail transit long term network, as well as the vision of Yibin city, and future development of rail transit network. 4, Yibin city, preliminary rail traffic levels service levels, system model, and technical standards. 5, to ensure that network can be implemented. 6, stable conditions for planning and supporting of Yibin city track traffic construction and formation of rail transit industry, provide conditions for the start-up and development of rail transit in Yibin city. 1.7 technical course technology is the projects research program and research ideas. Technology reflects the various stages in the process, logical relations between various levels, research, techniques and phases. Network planning process the whole process can be divided into four parts, namely, background research, network architecture research, planning and implementation of research and programming interfaces. Figure 1.7-1 Yibin city rail transit network planning technology roadmap planning interface is mainly responsible for network planning interface with follow-up planning tasks. Network planning Urban planning system in a transitional position, online network planning is completed, will be carried out as soon as possible the following planning projects: 1, detailed control of the land of rapid rail transit network planning; 2, the partitioning for network planning; 3, joint planning of rail transport and urban transport in other ways; Detailed technical courses see below. Figure 1.7-2 General technology route f