新型单电源混合不对称多电平变换器拓扑及控制方法-中国电机工程学报.PDF

第29 卷 第33 期 中 国 电 机 工 程 学 报 Vol.29 No.33 Nov. 25, 2009 8 2009 年11 月25 日 Proceedings of the CSEE ©2009 Chin.Soc.for Elec.Eng. 文章编号：0258-8013 (2009) 33-0008-07 中图分类号：TM 464 文献标志码：A 学科分类号：470-40 新型单电源混合不对称多电平 变换器拓扑及控制方法 孙醒涛，孙力，吴凤江，赵克 (哈尔滨工业大学电气与自动化学院，黑龙江省 哈尔滨市 150001) Topology and Control of Single Power Source Hybrid Asymmetrical Multilevel Converter SUN Xing-tao, SUN Li, WU Feng-jiang, ZHAO Ke (School of Electrical Engineering and Automation, Harbin Institute of Technology, Harbin 150001, Heilongjiang Province, China) ABSTRACT: Single power-sourced hybrid asymmetrical 0 引言 converters have some merits such as simple structure, reduction 混合不对称多电平变换器可有效提高输出电 in volume and cost compared with hybrid asymmetrical 压的电平数，具有输出谐波小、较传统的多电平变 converter, but its control is too complex. A novel single power 换器采用更少的功率元件等优点，越来越受到人们 asymmetrical converter topology was proposed in the paper to 的重视[1-16] 。自文献[1]首次提出混合多电平的概念 solve the difficulty in control of the neutral-point voltage and sub-converter capacitor’s voltage synchronously. The control of 后，各种具有不同拓扑结构的混合不对称多电平变 converter was much simplified through adding an assistant leg 换器陆续被提出[1-10] 。单电源拓扑是在混合多电平 to control the neutral-point voltage independently. PI control 变换器基础上，进行进一步简化而得到的新型混合 was adopted to control the system stability of sub-converter 拓扑结构，其特点是主变换器采用电源供电，从变 capacitor’s voltage and redundant states selection was used to 换器没有电源而只采用电容提供输出电压。这种单 control the sub-converter capacitor’s voltage in every period of 电源混合不对称多电平拓