犁的装配AssemblingofThePlough-Elitex.DOC

 目录 一、 适用范围和主要技术参数 Scope of Use and The Main Specifications - 1 - 二、 犁的构造及其各部分的作用Structure of The Plough and The Roles of Each Part - 1 - 三、 犁的装配Assembling of The Plough - 2 - 四、 使用和调整Operation and Adjustment - 3 - 五、 注意事项 Caution - 5 - 六、 修理： REPAIRING - 5 - 七、 存放Storing - 5 - 适用范围和主要技术参数 Scope of Use and The Main Specifications 20系列铧式犁为全悬挂式，与标定功率为8.8～33KW拖拉机配套作业。适用于壤土、沙壤土地区熟地旱田耕作。 该系列犁具有结构简单、耕作适应范围广、作业质量好、地表平整、碎土覆盖性能好、墒沟小等特点。 Series of 20 is a mounted bottom plow, designed to match with rated power 8.8KW to 33KW wheel tractor and is suitable for loam，or sandy loam soil in the cultivated area. This implement is compact in construction, and wide range in application. It produces the best wort, leaving alevel surface and a narrow furrow, with a good pulverization and mulching. The maximum plowing depth is 25cm. 主要技术参数见表一： Main specifications see table 1: 型号Model 项目Item 1L-220 1L-320 1L-420 1L-520 犁体个数（个） Nos. of the plough body 2 3 4 5 幅宽cm Width 单犁体幅宽(CM) Furrow width 20 总幅宽(CM) Total working width 40 60 80 100 耕深cm Depth 20-25 外形尺寸 Overall dimension (L×W×H) cm 124*70*96 180*82*104 240*94*104 300*106*104 运输地隙 Transport clearence 不小于37cm On les than 37cm 质量kg Weight 64 100 130 170 生产率（亩/时） Output (ha/h) 2.1-2.9 2.1-2.9 5-6.6 7.5 犁的构造及其各部分的作用Structure of The Plough and The Roles of Each Part 20系列铧式犁由犁架、限深轮、犁体、前犁体部分、后犁体部分组成。（见图一） The plough consists of frame, depth limit wheel, front plough body assembly and rear plough body assembly. See (Fig. 1) 图一 犁的构造. Fig Structure of Plough 1、犁架部分 . frame assembly 2、限深轮部分 depth limit assembly 3、前犁体部分 front plough body assembly 4、后犁体部分 rear plough body assembly 犁架由梁架焊合、斜撑杆焊合、前撑杆组成，用来固定各个工作部件，并通过三挂接点与拖拉机连接。 Frame assembly consists of frame welding, deviate support rod welding and front support rod for fixing all the working parts and connect to the tractors by three points. 犁体是犁的主要工作部件，起切土、碎土、翻土、和覆盖杂草的作用。犁体分前犁体和后犁体，其区别是后犁体的犁侧板比前犁体的稍宽、稍长并在尾部装一个犁后踵。每个犁只有一个后犁体。 Plough body is the main working parts of the ploug