机械故障诊断的信号处理方法频域分析-心理与行为研究-上海交通.pdf

机械故障诊断的信号处理方法：频域分析 173 文章编号：1006-1355(2013)01-0173-08 机械故障诊断的信号处理方法： 频域分析 王金福，李富才 ( 上海交通大学 机械系统与振动国家重点实验室，上海 200240 ) 摘 要：频域分析方法是机械故障诊断中信号处理最重要和最常用的分析方法，其种类繁多且各具特点。因而，对 工程实际情况要釆用合理的频域分析方法就十分困难。由此，针对多种的故障类型，根据机械设备关键设备构件的振 动特性，为实现机械设备多类不同的故障诊断，在分析和比较了不同的信号处理和特征釆取相应的算法的基础上，再 釆用合适的频域分析方法；就能有效地确保诊断分析的精度和可能性。 关键词：振动与波；机械故障诊断；振动信号；特征提取；频域分析 中图分类号：TB53 文献标识码：B DOI 编码：10.3969/j.issn. 1006-1335.2013.01.036 SignalSignal ProcessingProcessing MethodsMethods inin FaultFault DiagnosisDiagnosis ofof MachineryMachinery ——AnalysesAnalyses inin FrequencyFrequency DomanDoman WANG Jin -fu , LI Fu -cai ( State Key Laboratory of Mechanical System and Vibration, Shanghai Jiaotong University, Shanghai 200240, China ) AbstractAbstract :: Frequency-domain analysis is the most conventional method for signal processing in fault diagnosis of machinery. In the literature, a number of frequency-domain-based methods have been applied to detect faults in machinery and each method has its own features. Therefore, selecting appropriate method plays a pivotal role in inspecting defects according to vibration signals. Characteristics of fault-caused vibration signals and frequency-domain-based methods were summarized in this paper using representative examples, so as to establish a rule of selecting appropriate signal methods for extracting vibration features of different mechanical equipments. The results can be used to improve the precision and reliability of several kinds of fault diagnoses for key components in different machinery.