液静压锥形轴承之无限大刚度特性分析theinfinitestiffness.pdf

黎明學報 第二十二卷 第二期 中華民國一○○年七月三十一日 JOURNAL OF LEE-MING INSTITUTE OF TECHNOLOGY VOL. 22, NO.2, JULY 2011 液靜壓錐形軸承之無限大剛度特性分析 The Infinite Stiffness Characteristics Analysis of Hydrostatic Conical Bearings 蕭順德 Shun-Te Hsiao 黎明技術學院機械工程系 Department of Mechanical Engineering, Lee-Ming Institute of Technology 鐘世明 李德福 Shyh-Ming Jong, Te-Fu Lee 黎明技術學院機械工程系 Department of Mechanical Engineering, Lee-Ming Institute of Technology 摘要 本文研究液靜壓錐形及圓柱軸承之靜態特性，使用單向薄膜節流器補償油 腔之工作壓力。採用流阻網路法分析油腔壓力探討油腔數目、偏心率、位移率、 節流器節流參數、薄膜變形係數、軸承長徑比、周向節流面寬度比、軸向節流 面寬度比、半錐角等設計參數對軸承承載能力、靜剛度及無限大剛度之影響。 關鍵詞：液靜壓錐形軸承、單向薄膜節流、承載力、靜剛度、無限大剛度 ABRTRACT This paper studies the static characteristics of the hydrostatic conical and cylindrical bearings, which use capillary and single-action membrane restrictors to compensate the working pressures of recesses. The flow resistance network method is applied to analyze the influences of the design parameters including the number of recesses, membrane restriction, membrane compliance, length-diameter ratio, half of cone-angle, circumferential land width ratio, and axial land width ratio to the load capacity, static stiffness and infinite stiffness of bearing. Keywords: hydrostatic conical bearing, single-action membrane restriction, load capacity, static stiffness, infinite stiffness 95 黎明學報 22(2)： 1.前言 考量並不夠完整，而軸承動態性能基於優 良的靜態特性，Kang 等人[9]以流量平衡 Raimondi 和 Boyd[1] 以理論分析及實