4045铝合金热变形行为及其加工图.pdfVIP

第 40 卷第8 期 湖南大学学报(自然科学版) Vo l. 40 ,No. 8 2 0 1 3 年 8 月 Journal of Hunan University(Natural Sciences) Aug. 2013 文章蝙号:1674-2974(2013)08-0083-07 4045 铝合金热变形行为及其加工图铸 张辉13 ，伍豪杰1 ，蒋福林1 (1.湖南大学材料科学与工程学院，湖南妖沙 410082 , 2. 湖南大学湖南省喷射沉狈技术及应用重点实验室，湖南长沙 410082) 摘 要:采用 Gleeble-3500 热模拟试验机对 4045 铝合金在变形速率为 0.01-10 S-1 , 变形温度为 300-450 -C条件下进行等温热压缩实验，研究了该合金的热变形行为及其热加 工特性.结果表明 :4045 铝合金热变形过程的流变行为可用双曲正弦模型来描述，其平均滋 活能为 189.93 kJ/mol.基于动态材料模型(DMM)获得了 4045 铝合金的热加工圈，并结合 热加工固和金相显微组织分析得到了该合金在实验参数范围内较优约热加工工艺参数范 围 z 加工温度为 380-450-C ，变形速率为 0.1-0.3 S-1. 关键词:铝合金p 热变形s 材料动态模型;加工团 申圈分类号:TG301 文献标识码:A Hot Deformation Behavior and Processing Map of 4045 Aluminum Alloy ZHANG Hui 1 ，价， WU Hao-jie 1 , JIANG Fu-lin 1 (1. College of Materials Science and Engineering , Hunan Univ , Changsha , Hunan 410082 , China õ 2. Hunan Province Key Laboratory for Spray Deposition Technology and Application , Hunan Univ. Changsha , Hunan 410082 , China) Abstract: Isothermal compression tests of 4045 aluminum alloy were carried out at the strain rate range of 0.01-10 S-1 and at the temperature range of 300-450 -C on Gleeble-3500 system to study the hot de- formation behavior and hot workability. The results show that the flow behavior of 4045 aluminum alloy can be described by the hyperboli c-sine equation with the average activation energy of 189. 93 kJ/mo l. The processing maps were calculated on the basis of the dynamic materials model (DMM). The optimum pro- cessing parameters were obtained at strain rate range of ar