CO2激光-MAG电弧复合焊过程中激光功率对电弧及熔滴行为的影响.pdfVIP

啦军然 Vo1.45 No.ll 事 4H昏院 11 期 2015 年 11 月 Electric Welding Machine Nov.2015 申i CÐ险激舞4嗣. 李庆海 (浙江工贸职业技术学院，浙江温州 325(03) 摘要:利用高速摄像系统和电弧分析仪分析CO 激光rMAG 电弧复合焊过程中激光功率对电弧及熔滴行为的影 2 响。 试验结果表明:焊接过程中的实际热源间距受到焊接电流大小的影响，且当其在2mm 时焊接效果 最优;在导电通道中的带电粒子在运动过程中扰动、 漂移以及熔滴过渡模式、 焊接模式的改变造成了 焊接过程中电弧电流及电压波形的紊乱;激光功率影响了熔滴行为，当采用 160 A 和 180 A 的焊接电 流时，激光功率的增加导致熔滴过渡频率先减小后增大。 激光 关键词:C0 -MAG 电弧复合焊;激光功率;也弧形态;熔滴行为 2 中图分类号:TG456 文献标志码:A 文章编号:1001-2303(2015)11-0026-07 DOI: 1O.7512/j.issn.l001-2303.2015.1 1.06 lnßuence of laser power on arc and droplet behaviors in C02 laser-MAG arc hybrid welding LI Qinghai (Zhejiang Industry and Trade Vocational College ,Wenzhou 325∞3 ， China) Abstract:In 由is paper. by using hi阱 speed camera system and arc analyzer.the influence of laser power on arc and droplet behaviors in C02 laser-MAG arc hybrid welding is analyzed. The results show that in welding process. the practical heat ωurce spacing is afIected by the size of welding current. and the optimal welding effect appears when welding current is 2 mm; The changes of disturban倪.dr讼.dr叩let transition mode and welding mode of charged particles in conducting channel in the movement pl(拥cess 四use the disorder of arc current and voltage waveform in welding process; Laser power influences the 也叩let behavior .when the wel也ng current is res严ctively 1ωA and 180A.the increase of laser power leads to droplet transition frequency decreasing first and then increasing. Key words:C