压缩题库（Compression test bank）.docVIP

压缩题库（Compression test bank） Compression section library 1, compressor thin oil station screen plugging should be how to deal with? Answer: 1, double compressor oil filter adopts manual switching station filtering system, filtering accuracy is 25, when the filter is blocked, then the two groups before and after the oil pressure differential increases to 0.15MPa, alarm system, you should open another filter exhaust valve to bleed, oil discharge, switch a quick switch handle, switch off and remove the cleaning cartridge. 2, instrument air pressure is insufficient, whats the impact on compressor? Answer: compressor gas control system is through the top suction valve to achieve. The compressor suction valve is arranged on the top of the top opening of the valve member top line upper pipe and instrument cabinet two gas source connected to the interface of instrument air enters the top opening of the valve will open the suction valve plate, the suction valve is in a normally open state, and the side of the cylinder will no longer reference work, when the pressure is low, will not be able to open the valve unable to adjust, 0%, 50%, 100% and three conversion period of gas. 3, there is a false liquid level in the methyl ether cooler, which leads to the handling of the refrigerator liquid? Answer: (1) immediately turn off the throttle valve. (2) contact the dispatcher to send the standby power to the standby machine. (3) stop liquid refrigerator. (4) observe the temperature change of compressor inlet, adjust the load of refrigerator at any time. (5) contact the level meter of automatic control and instrument maintenance. 4, compressor post compressor inlet valve flange leakage occurred, what performance, how to deal with? Answer: (1) compressed scene is full of strong ether odor; a section of intake pressure has decreased significantly (2) quickly open all axial fans, strengthen air circulation, contact dispatchers to inform on-site maintenance, strengthen on-site inspections