台钓调浮速成（Adjustable float fishing crash）.docVIP

台钓调浮速成（Adjustable float fishing crash） Fishing floater adjustment (a) fishing float structure In the construction of the fishing float, and the sensitivity is related to the following three points: 1, floating head is a solid rod, the same size, like the pencil core is longer; making floating body with peacock calamus or light wood, middle slightly thick, tapering at both ends; the floating tip is hollow or solid thin plastic tube, divided into several orders (small), painted with different fluorescent colors. Floating weight distribution is top heavy, point near the tip of the buoyancy, away from the head end float into the water after the long distance, easy to erect and stable. The overall shape of the float is slender, streamlined, smooth and light in appearance, buoyant, and resistant to turbulence in the water. Because of the fine tail, the wind resistance is good. 2 、 the combination of float and fishing line is hard link. First put 1 space beans on the fishing line, and then put on the floating seat, and then put on 1 space beans, the floating seat in the middle, floating when fishing thin rod inserted in the floating seat, fishing line movements can be quickly passed to the float. In addition to the lower space beans, as the pole moves too rough, may move downward, the upper limit of the space beans generally will not change. Therefore, during the fishing process, the position of the floater is not often corrected, and the sensitivity of the floater response is ensured. 3, bleach is fine, the diameter of only 0.5~1.0 mm, a length is 7~13 mm, with an average diameter of 0.7 mm, 10 mm in length calculation, a mesh generated by buoyancy is 3.9 grams (the weight by the entire float, which is assumed to elide) on the hook grounding light condition the fish bite, pull a heavy orders required strength (assuming the falling hook, line, the resistance is not), this power is very small, and the bar shaped bleach or bleach tail thick wind drift, of course, more sensit