面部比例（Facial proportion）.docVIP

面部比例（Facial proportion） Analysis of golden proportion of facial features by golden cutting Golden section law It was discovered by Pythagoras, an ancient Greek mathematician in the sixth Century BC, and later by Platon, an ancient Greek scientist, who called it the golden divide. This is actually a digital proportional relationship where one line is divided into two parts, the long and short segment ratio is equal to the whole line and the long segment ratio, the numerical ratio of 1.618: 1 or 1: 0.618, that is the product of long and short segment length is equal to the square. 0.618, with a strict proportion, artistry and harmony, it has rich aesthetic value. Beauty is not only decided to smooth white skin, what is more important is to have a perfect facial contour, only facial width to length ratio close to or conform to the golden ratio, which is 1 to 0.618, the best effect. Lets take a look at the specific facial features, golden ratio. Magic eye: 1, from an aesthetic point of view, the size of the eye and the size of the face should be accompanied by a certain ratio. If the width of the face is 10CM, then the eye is 2 to 2.5 of the ratio, the length of the eye is 3 cm, 1 cm wide, the eye distance is equivalent to the length of the eye, the ideal eye. 2, the distance between the upper eye margin and the eyebrows is about 10mm. Distance between 2 inner canthal spacing should be two lateral canthus 1/3 or equivalent length of an eye. 3, inner canthus crack angle of 48 degrees - 55 degrees, the outer canthus eye crack angle of 60 degrees - 70 degrees 4. eye crack height is 10 12.5mm, eye fissure width was 30 - 34mm Rising nose: 1, the length of the nose is 1/3 of the facial length. Usually 6 to 7.5 centimeters. 2, the width of the nose, the outer edge of the two nostrils, the distance is generally equivalent to 70% of the nose length, nose width of about 1 cm, the tip of the nose about 1.2 cm. 3, nose height generally can not be less than 9 mm, men generally 12 mm