PLC方坯连铸切割系统.doc

摘要 随着计算机技术和自动化技术的迅速发展及其在连铸生产中的广泛应用，连铸机自动控制策略已经成为过程控制领域内的一个重要的研究方向。 首先，对连铸连铸技术的现状与发展进行介绍。 其次，对连铸机切割控制系统的软件进行设计以及方坯连铸机切割控制系统PLC程序设计方坯连铸机切割控制系统仿真调试本文基于西门子S7-300PLC，结合控制工艺和长钢方坯连铸机生产中的切割工艺与相关操作，设计了方坯连铸生产中的重要环节-切割系统，用相关软件进行了配置。基于控制要求，合理选择了硬件配置，科学地设计了软件系统。设备基础上进行调试和配置，运用step7软件进行编程仿真，得出结果进行验证。 关键词：方坯连铸；切割系统；STEP7；PLC Abstract With the rapid development of computer technology and automation technology and its widely application in continuous casting production, the continuous casting machine automatic control strategy has become in the field of process control is an important research direction. First of all, to understand present situation and the development of continuous casting and continuous casting technology and the introduction. Secondly, to design the software of the control system of continuous casting machine for cutting and billet continuous casting machine for cutting control system of PLC program design. Finally, using STEP7 billet continuous casting machine for cutting control system simulation debugging. This article is based on Siemens S7-300 PLC, combined with control technology and Chang Gang billet caster in the production of cutting process and the related operation, is an important step to design the billet continuous casting production cutting system, with the related software configuration. Based on the requirement of control, reasonable choose the hardware configuration, scientifically design the software system. Based on equipment debugging and configuration, using step7 programming software simulation, the results of validation. Key words: Billet continuous casting; Cutting system; STEP7；PLC 目录 1 绪论 1 1.1 概述 1 1.2 连铸技术的现状和发展 1 1.3 PLC控制技术的现状和发展 2 2 方坯连铸机工艺流程及主要设备 4 2.1 连铸工艺简介 4 2.2 连铸机工艺流程图 5 2.3 连铸机主要设备 5 3 方坯连铸机切割控制系统硬件配置 7 3.1 可编程序控制器PLC的组成 7 3.2 可编程序控制器PLC工作原理 8 3.3 方坯连铸机切割控制系统PLC硬件组态 8 3.3.1 PLC的选型 8 3.3.2 电源、CPU、系统I/O模块的选择 9 3.3.3 硬件组态 10 3.3.4 系统I/O分配 10 4 方坯连铸机切割控制系统软件设计 12 4.1 方坯连铸机切割工艺流程 12 4.2 方坯连铸机切割控制系统PLC程序设计 14 4