四层电梯PLC欧姆龙、西门子课程设计报告.doc

课 程 设 计 题 目：PLC四层电梯课程设计 姓名（学号）： 姓名（学号）： 指 导 教 师 ： 专 业：电气工程及其自动化 班 级： 所 在 学 院：电气信息学院 2014 年 1 月 摘要 可编程序控制器，是微机技术与继电器常规控制技术相结合的产物，是在顺序控制器和微机控制器的基础上发展起来的新型控制器，是一种以微处理器为核心用作数字控制的专用计算机。。可编程序控制器、、Programmable logic controller, the computer technology and conventional control relay product of the combination is in the order of the controller and the computer controller developed on the basis of the new controller is a microprocessor core for dedicated digital control computer. Elevator as an important transport high-rise buildings with people living and working increasingly closely linked. PLC as a new generation of industrial controllers, with its high reliability and advanced technology, in the elevator control has been widely used, so that the elevator from the traditional relay control the development of an important direction of computer control, elevator control and become transformation of the hot spots. Keywords：Programmable logic controller、elevator、control 1. 设计任务书--------------------------------------------------------------------------3 1.1 设计任务-------------------------------------------------------------------------3 1.2 控制要求-------------------------------------------------------------------------3 2. 方案的选择-------------------------------------------------------------------------4 2.1总体方案的确定.欧姆龙设计方案---------------------------------------------------------------------------5 3.1电气主电路图---------------------------------------------------------------------------5 3.2 PLC接线图--------------------------------------------------------------------------5 3.3 I/O分配--------------------------------------------------------------------------6 3.4 梯形图---------------------------------------------------------------------------７ 3.5设计总结---------------------------------------------------------------------------------8 4.西门子设计方案 ---------------------------------------------------------------------------9 4.1硬件配置简介--------------