从实例的形式中讲述扫描学习的方法（The method of scanning learning is illustrated in the form of examples）.doc

从实例的形式中讲述扫描学习的方法（The method of scanning learning is illustrated in the form of examples） The method of scanning learning is illustrated in the form of examples Look for the best point from the scan to the old picture. Here are a few points in the form of an example to help you learn to scan. 1. looking for the best scanning position The scanning effects of different positions on most scanners are always different. Its nothing to be surprised if you find that the scan in one area of the scan platform is better than the others. In scanning, the image should be scanned in the best scanning area as much as possible, so as to obtain the best scanning effect. How do I hit the best location for the scan? We can find a clean white surface of the same size as the scanning plane, such as: opaque white paper, scanning the scan plane, setting the resolution lower, between 72~100spi. Suppose: the scanner has a scan area of 8.514 inches. The scanned image into an image editing program, such as Photoshop, with a balance adjustment menu command to exaggerate the nuances in the image area, we can see that there are black spots scanning the edge of the image, and on the left a bright mark, tainted region is about 11 inches down the area. This area is where we should be very careful when doing fine scans. Once the scanners best scan position has been determined, a paper template can be made to identify the location so that it will be more convenient to use the scanner later. 2. correction of poor color In poor lighting, taking pictures often results in unnatural color differences on the picture. But dont worry, its much easier to color images in a computer than in a dark room. The best way to get a good scan every time is to use the first scan without the step control function (i.e.: Gamma = 1). Then, the Curve (curve) command in the image editor adjusts the order until the color is appropriate, and stores the curve. Using the Import Curves (input curve) command for two scans, this ti