火花机（Spark machine）.docVIP

火花机（Spark machine） Spark machine catalog [hidden] The development process of spark machine Principles of EDM The main function of EDM Types of spark machines The future development of spark machine Spark machine introduction (referred to as EDM, full name Electrical, Discharge, Machining) A kind of machining equipment, mainly used in edm. Widely used in all kinds of metal mold, mechanical equipment manufacturing. Electrical discharge machining (EDM) is a kind of special processing method, which is produced by the electric erosion produced by the pulse discharge between the two poles immersed in the working fluid. It is also called EDM or electrical erosion machining (EDM). [Edit] the development process of spark machine In 1943, the Soviet Union scholar Lazarenko and his wife invented electric spark machining, and then developed rapidly with the improvement of pulse power supply and control system. The pulsed power source originally used was a simple resistor capacitor circuit. In the early 50s, improvements were made in resistors, inductors, capacitors, and other circuits. At the same time, the so-called long pulse power supply, such as pulse generator, is adopted to improve the etching efficiency and reduce the relative loss of the tool electrode. Then there is the high power tube, thyratron and high frequency pulse power supply, so that in the same conditions of surface roughness under productivity. In the mid 60s, the transistor and SCR pulse power supply appeared, which improved the energy efficiency and reduced tool electrode wear, and expanded the adjustable range of coarse finishing. By 70s, the high and low voltage pulse composite, multi loop pulse amplitude, pulse waveform and adjustable pulse power supply, the surface roughness and machining precision and reduce the tool electrode loss and other aspects have made new progress. In the control system, from the initial simple maintenance of the discharge gap, the control tool electrode advance and retreat, a