掘进资料（Tunneling data）.docVIP

掘进资料（Tunneling data） Tunneling operation rules 1, before and after class work and shooting, strict implementation of tapping system. All staff must pay attention to help the situation well, at any time to find a living stone floating gangue. In the work process to strictly enforce the wellbore construction operation rules, in violation of regulations, prohibit driving. 2, to seriously study the safety technical measures, clearly grasp the construction drawings, specifications, familiar with blasting chart, reasonable arrangement of holes, using smooth blasting. 3, driving personnel must be familiar with the basic knowledge of underground mine, the relevant technical information, underground electrical equipment, cable, line use, safety evacuation exit line. 4, first note: The play in front of working face must be leveling, clear virtual to real waste water at the bottom, dig water nest. The play in front of all ready for tools, and anti off waste wounding. The play should be free to help find in front part of the loose gangue, gangue to prevent out of wounding. The first line to find the center position by center in the working face by blasting chart highlights the eye position, then the drilling work, when necessary to put each other in line control, nuclear. The drill should first send water after the wind, stop drilling should be cut off after the wind stopped. 5, the hole allowed error The eye is not more than 50mm. The gun eye size shall not exceed the design requirements of + 50mm, each ring spacing shall not exceed the design requirements of 100mm. The hole depth, the individual shall not exceed the design requirements of + 100mm, the hole should be playing at the same level. The hole should be taken around the pile of Wai Wong weir measures to prevent rock slurry recirculation, the hole of rock dust blowing, to prevent gangue, plugging caused by waste eyes. After all, the 7 hole, must put the eye cleaning rock powder, and immediately plugged with cork tightl