solaris常见问题收集（Solaris FAQ collection）.docVIP

solaris常见问题收集（Solaris FAQ collection） 1. how to see the speed of network card A:dmesg |grep Link can see the current card is at what rate up or 1 on behalf of 100M with NDD /dev/hme link_speed, and if the 0 on behalf of the 10M. 10M NDD -set /dev/hme link_speed 0 running with mandatory 100M card. 2. how do I modify the IP address? A: should first see the introduction of sys-unconfig, which is the reverse process of the machine setting so that the machine can be restarted after it can be restarted Set up. This can also be achieved by modifying the following files. IP address of /etc/hostname.hme0 network card hme0 The corresponding table of the IP address of the host name in the /etc/hosts network /etc/netmasks sets the network number and network mask The method and sequence of /etc/nsswitch.conf domain name resolution /etc/resolv.conf DNS Server address and domain name /etc/defaultrouter sets the default gateway address /etc/nodename host name /etc/net/ticlts/hosts /etc/net/ticots/hosts /etc/net/ticotsord/hosts Where is the system profile for 4. Solaris? A: can view the /etc/system file with some options for default loading when Solaris starts, including Settings for shared memory size, etc.. 2. Q: in Solaris, what file does the user default Shell specify? A: can view the default user shell in /etc/passwd, as specified here. 5., if Solaris unfortunately forgot the root password, how to solve it? A: can have the following two situations The 1. workstation has only root users and no other users. 2. workstations, there are other users besides root users 1. if we connect to the network, we can use the remote buffer overflow method, but this method is not In the classic approach, and some remote buffer overflow has a certain destructive, not recommended. still One way to do this is to take the SUNs own compact disk for guidance, and suggest this approach: 1. boot CDROM -s 2. fsck /dev/dsk/c0t0d0s0 (depending on the root partition of the device) 3., mount, -F, UFS, /dev/d