181;Clamp5011ZA Semtech（181;Clamp5011ZA Semtech）.pdfVIP

µClamp5011ZA Ultra Small µClamp® 1-Line, 5V ESD Protection PROTECTION PRODUCTS - µClamp® Description Features µClamp® TVS diodes are designed to protect sensitive u High ESD withstand Voltage: +/-15kV (Contact) and electronics from damage or latch-up due to ESD. They +/- 18kV (Air) per IEC 61000-4-2 are designed to replace 0201 size multilayer varistors u Ultra-small package (MLVs) in portable applications such as cell phones, u Protects one data line notebook computers, and other portable electronics. It u Low ESD clamping voltage features large cross-sectional area junctions for conduct- u Working voltage: 5V ing high transient currents. This device offers desirable u Low capacitance: 5pF maximum characteristics for board level protection including fast u Low leakage current response time, low operating and clamping voltage, and u Extremely low dynamic resistance: 0.15 Ohms (Typ) no device degradation. u Solid-state silicon-avalanche technology ® µClamp 5011ZA features extremely good ESD protec- tion characteristics highlighted by low typical dynamic Mechanical Characteristics resistance of 0.15 Ohms, low peak ESD clamping volt- age, and high ESD withstand voltage (+/-15kV contact u SLP0603P2X3F package per IEC 61000-4-2). Low maximum capacitance (5pF at u Pb-Free, Halogen Free, RoHS/WEEE Compliant VR=0V) minimizes loading on sensitive cirucuits. Each u Nominal Dimensions: 0.6 x 0.3 x 0.25 mm device will protect one data or power line operating