2P3 Superheterodyne MW Radio Receiver Kit （2 p3超外差MW无线电接收机工具包）.pdfVIP

2P3 Superheterodyne MW Radio Receiver Kit Manual CRKITS.COM Rev. C Covering the paper based manual 2014.3 VER. 4 “Green PCB” In the mid 1960s, with the population of transistors, radio amateurs of China were pa ionate to build their own radio receivers. It was a dream to have a good looking case for their homebrew radio receiver, so 2P3 case appeared. 2P3 was compact and beautiful. Once it hit the street, it was welcomed. Many people saved money for buying one, and built various radios from single transistor to six transistor superheterodyne with it, and the dream of building a transistor radio with a case came true. Half a century has pa ed, but those senior radio amateurs still can remember 2P3. Once talking about transistor radios, 2P3 is always a hot topic. People smile if they were lucky to have built one, and regret if they failed. However, 2P3 is seldom found these days, and it becomes a product for collection. So, it becomes a new dream to own 2P3 again! We reproduced 2P3 case, and designed and produced a superheterodyne radio receiver kit based on the current component characteristics. Hopefully it can fulfill the senior radio amateurs dream, inspire the interest of the new generation and help improve their hands-on capabilities. CRKITS is now proudly introducing the kit to the worldwide. The kit manual translation is dedicated for our customers, to match our standard of service. “2P3” Superheterodyne MW Radio Theory of Operation “2P3” is a tiny superheterodyne MW radio receiver. Performance: Frequency Range: 530 kHz ~ 1620 kHz Power Supply: 3 V (2x AA size battery) Sensitivity: 1 mV/m Max Audio Output: 120 mW Quiescent Current: 7 mA Fig. 1 and Fig. 2 are the outline, Fig. 3 is the internal structure of 2