Appendix B Sample Specification Covering （附录B样品规格覆盖）.pdfVIP

ACG Commissioning Guideline Appendix B Sample Specification Covering Contractor Responsibilities for HVAC Commissioning NOTES TO APPENDIX ‘B’ An inter-disciplinary team carries out commissioning. The Commissioning Agency is the leader of the team, and has overall responsibility for its organization, coordination and successful completion. But this responsibility cannot be achieved without all other team members carrying out their responsibilities. The General Contractor (or Construction Manager), Mechanical Contractor and the various sub- contractors within Division 15, and the Electrical (Division 16) Contractor all have responsibilities with respect to HVAC systems commissioning. These responsibilities must be set out in the contract specifications defining their work. The material in this appendix assumes the use of Comprehensive HVAC Commissioning as described in Chapter 5 of this Guideline. It contains a sample set of specification sections that describe the comprehensive commissioning process, and define the contractors’ responsibilities with respect to commissioning. This sample specification will also apply to construction HVAC commissioning. If a decision to include commissioning is made before the contract documents are completed, there is an opportunity to include commissioning requirements in the specifications issued for bid. If construction has started before commissioning is decided on, then the sample specification could be used as a guide to preparing the commissioning specification that contractors will use to identify their commissioning costs on a change order basis. The sample specification sections are as follows: • Section 01660 – Commissioning of HVAC Systems This section is in the General Contractor’s part of the specifications. It contains the