DCDC Converter Based On Cascade Cockcroft （基于级联科克罗夫特DCDC变换器）.pdf

ISSN: 2319-5967 ISO 9001:2008 Certified International Journal of Engineering Science and Innovative Technology (IJESIT) Volume 2, Issue 2, March 2013 DC-DC Converter Based On Cascade Cockcroft-Walton Voltage Multiplier for High Voltage Gain without Using Transformer R. Prince1 , R. Kalaivani2 1(Final year-ME-Power Electronics Drives, Rajalakshmi Engineering College/Anna University, India) 2(Associate Professor, Dept of EEE, Rajalakshmi Engineering College/Anna University, India)  Abstract : This paper proposes a high step-up DC-DC converter based on Cockcroft- Walton (CW) voltage multiplier without using step up transformer. The low input DC voltage is boost up by boost inductor (L ) in DC -DC converter and s the proposed circuit performs the inverter operation. The n-stage CW-voltage multiplier is applying low input AC voltage to high output DC voltage. It provides continuous input current with low ripple, high voltage gain, reduced switching losses, low voltage stress on the switches, diodes and capacitors and also improving efficiency of the converter. The power switches having two independent frequencies fsm and fsc. The fsm operates at higher frequency of the output voltage and it is regulated by controlling the duty cycle of Sm1 and Sm2, while the fsc operates at lower frequency of the desired output voltage ripple and it can be adjusted by Sc1 and Sc2. Finally the proposed converter is validated by MATLAB simulation and experimental result is designed in prototype. A laboratory prototype is built for test and both simulation and exp