E Series EM Renk（E系列EM Renk）.pdfVIP

Innovative Power Transmission Slide Bearings Type E Series EMJournal Range 80-355 mm Technical Information This leaflet contains information which High thrust loads can be taken by tilting Electrical Insulation should be considered for the majority of RD thrust pads (type…A). In addition to applications where EM-type bearings the oil film, the cup springs supporting As a protection against stray currents are used with electric machines. All the the RD thrust pads have damping conducted by the shaft, EM-type other facilities of the E-type bearing properties and intercept shocks bearings can also be supplied in insulated versions. To do so, the modular system will, of course, also elastically. apply to EM-type bearings: e. g. spherical bearing shell seating within the bearing shells with two- or four-lobe This design requires lubrication by housing is electrically insulated by using bore, with journal tilting pads or RD circulating oil, e. g. the use of an oil a plastic shell firmly stuck to the thrust pads (relevant details on request.) pump. housing or an insulating foil. All EM-type bearing housings “with Most parts of the variants mentioned in Seals spherical insulation“ are available from this leaflet are available from stock. st