Electrical and mechanical interface requirements （机电接口需求）.pdf

DEHNcap Test Adapter/ DEHNcap HR-LRM DEHNcap/PC DEHNcap/IT DEHNcap/A DEHNcap/P Measuring Impedance Test Set Phase Comparator Interface Test Unit Voltage Indicator Voltage Indicator Safety Equipment Design of DEHNcap Voltage Detecting Systems Voltage Detecting Systems Metal-encapsulated switchgear installations, typically SF6 gas-insulated, Only electrically skilled or instructed persons are allowed to verify safe have become widely accepted in the field of switchgear construction. isolation from supply voltage. In these types of installation, conventional voltage detectors can often not be used for verifying safe isolation from supply voltage in accordance with EN/IEC 61243-1 (DIN VDE 0682 Part 411). For this reason, capacitive voltage detecting systems in accordance with IEC/EN 61243-5 (DIN VDE 0682 Part 415) have been developed for veri- fying safe isolation from supply voltage on all poles at the work location in accordance with EN 50110-1 (DIN VDE 0105 Part 100). Electrical and mechanical interface requirements for separable HR, LR and LRM voltage detecting systems HR LR LRM System description High resistance low resistance low resistance, modified Input impedance of the indicator XC 36 M 2 M 2 M Electrical response conditions of the interface I 2.5 μA 2.5 μA 2.5 μA Electrical response conditions of the U