INSTALLATION SERVICE MANUAL （安装维修手册）.pdfVIP

INSTALLATION SERVICE MANUAL Reverse Osmosis + DI Water Systems Model: RD-102 6-Stage RO+DI system, 100GPD, single output RD-106 6-Stage RO+DI system, 100GPD, dual output s + tank+ faucet PRODUCT SPECIFICATION 6- Stage Reverse Osmosis + DI Water Purification Systems Model no: RD-102 and RD-106 Capacity : Generates 50 to 100 gallons per day depends on water temperature, pressure, chemistry variations) System includes RO+DI unit: 6-stage unit, all filters included. Storage Tank (for RD- 106 only): 4 gal. pressurized tank with pre-charge pressure of 7~10 psi., powder coated steel construction with Food Grade butyl water bladder. NSF listed Water Dispensing Faucet (for RD- 106 only): lead-free, long reach goose neck type, chrome steel, locking lever for continuous dispensing. Hardware: feed water adapter, feed water valve, drain saddle valve, tank valve, and screws. Installation Service manual System Requirements Working pressure: 40 to 80 psi feed water pressure required, if below 40 psi, a booster pump is needed. We have a RO system with booster pump assembly. If the input pressure is above 80 psi, you MUST put a pressure regulator to reduce the pressure below 80 psi. Working temperature: 100 ~ 40 deg. F ( 37 ~ 4 deg. C ) pH range: 2- 11 If feed water has hardness level above 300 ppm, we recommend putting a water softener prior to the RO system. If feed water has iron, rust problem, we recommend putting a iron filter prior to the RO system. If feed water has bacteria problem, we recommend putting an ultra violet sterilizing system prior to RO system. Filter Service Life st 1 Stage Sediment filter : Recommend changing every 6 ~12 months. Replacement filter Part no.