Introduction to Radar Cross Section Reduction （介绍雷达截面减少）.pdfVIP

Cambridge University Press 978-1-107-09261-7 - Active Radar Cross Section Reduction: Theory and Applications Hema Singh and Rakesh Mohan Jha Excerpt More information 1 Introduction to Radar Cross Section Reduction 1.1 Introduction The concept of stealth or radar cross section (RCS) reduction and control has been a topic of interest since World War II. Attempts were initially made to reduce the detectability of the aircraft by employing wood and other composites as aircraft materials since they were less reflective to the radar waves than a metal. Following the initial systematisation, one realised that shaping and coating [by radar-absorbing materials (RAMs)] emerged as the primary techniques for the RCS reduction (RCSR). RCSR through shaping is readily apparent in case of stealth fighter aircraft F-22. The edges at principal and drooping ends of wings and rear end of the aircraft have similar angular sweep. Further, the fuselage and canopy are smooth-surfaced with slopes at sides. The shapes of the surface interfaces, such as the doors at bay and the seam of the canopy, are saw-wave-type. The vertical airfoil of aircraft tails is slant. The front side of its engine is obliterated and includes a serpentine-shaped engine duct. Finally, all the weapons are stored within the aircraft itself. These alterations in the conventional shape of the aircraft resulted in considerable RCSR of the aircraft. In contrast, RAM coatings have been used since 1950s to achieve low-RCS aircraft design. R