Solid State Relays Common Precautions Omron（固态继电器共同预防措施欧姆龙）.pdfVIP

Solid State Relays Common Precautions ●For precautions on individual products, refer to ■Precautions in individual product information. CAUTION Safety Cautions Touching the charged section is likely to cause OMRON constantly strives to improve quality and reliability. SSRs, electric shock. Do not touch the SSR terminal however, use semiconductors, and semiconductors may commonly malfunction or fail. Short-circuit failures represent the section (the charged section) when the power main failure mode and can result in an inability to shut OFF the supply is ON. For SSRs with terminal covers, be load. Therefore, for fail-safe operation of control circuits that use sure to attach the cover before use. SSRs, do not use circuits that shut OFF the load power supply only with an SSR, but rather also use circuits with a contactor or breaker The SSR and heat sink will be hot and are likely to that shuts off the load when the SSR fails. In particular, it may not cause burns. Do not touch the SSR or the heat sink be possible to ensure safety if the SSRs are used outside the rated ranges. Therefore, always use the SSRs within the ratings. either while the power supply is ON, or When using