Standard Pipe Sizes Saylor（标准管尺寸塞勒）.pdfVIP

Standard Pipe Sizes Standard Pipe Sizes Except for specialist applications, commercially available pipe comes in standard sizes. Pipes in a variety of materials - including carbon steel, steel alloys, as well as some plastics - are manufactured in these standard sizes. The pipe size is specified with two numbers: the nominal pipe diameter (or bore) and the pipe schedule. This then sets the outside pipe diameter, the wall thickness (and hence the internal diameter). A list of common standard pipe sizes are given below. A Table of the Most Common Standard Pipe Sizes Nominal Bore 1/2 inch (DN 15 mm), Outside Diameter 21.34 mm Schedule Sch. 5 Sch. 10 STD XS Sch. 160 XXS Wall Thickness (mm) 1.65 2.11 2.77 3.73 4.78 7.47 Internal Diameter (mm) 18.04 17.12 15.80 13.90 11.78 6.40 Schedule 40 has same dimensions as STD. Schedule 80 has same dimensions as XS. Nominal Bore 3/4 inch (DN 20 mm), Outside Diameter 26.67 mm Schedule Sch.5 Sch. 10 STD XS Sch.160 XXS Wall Thickness (mm) 1.65 2.11 2.87 3.91 5.56 7.82 Found this useful? Want further information on line sizing? Try the following links Liquids Pressure Drop Spreadsheet Tutorial on pressure drops Tutorial on gravity flow Internal Diameter (mm) 23.37 22.45 20.93 18.85 15.55 11.03 Schedule 40 has same dimensions as STD. Schedule 80 has same dimensions as XS. Nominal Bore 1 inch (DN 25 mm), Outside Diameter 33.40 mm Schedule