SUBSTRATE REQUIREMENTS CHEMBOND（衬底需求CHEMBOND）.pdf

SUBSTRATE REQUIREMENTS For Tile to, concrete sealers or curing agents, dirt, wax, tar, paint Properly preparing a substrate is one of the most important and loose toppings. If the surface contains these steps in a tile installation.The best installation is only as good substances, they must be mechanically removed. as the substrate beneath it.Taking the time to properly Note: The use of solvents, adhesive removers or acid prepare a substrate and address job-site conditions should etching is not recommended. be a priority. For best results, see individual Chembond b. Unless sanding or scraping a slab can produce a Product Data Sheets and this document for substrate clean substrate that is free from contamination, more compatibility. aggressive methods such as grinding, shotblasting and scarification should be considered. Environmental Requirements Note: It is important to follow safety guidelines for a. Maintain environmental conditions and protect work the specific substrate, as well as local, provincial during and after the installation. Comply with trade and and federal regulations. industry standards as well as the manufacturers printed c. All supporting surfaces should be structurally sound, recommendations. solid, stable, level, plumb, and true to a tolerance in plane b. When necessary,build a temporary shelter and use of 3 mm in 2,44 m (1/8 in 8 ft.) for walls and 6 mm in indirect a