SUMIKASUPER LCP TECHNICAL NOTE （SUMIKASUPER LCP技术报告）.pdfVIP

TECHNICAL NOTE Electronic Materials Division 00 Proper Use of SUMIKASUPER LCP The contents of this document have been compiled based on are not intended as guarantees on product performance. current documents, information, and data and may be revised Be aware of intellectual property rights when using this product. when new information is available. (1) Handling The following items refer to essential points when handling SUMIKASUPER LCP. Ensure that SUMIKASUPER LCP is handled safely. Carefully read the Material Safety Data Sheet regarding the handling of SUMIKASUPER LCP before use. Examine the safety of any additives for use with SUMIKASUPER LCP. [1] Safety and Health Ensure that any gases emitted from drying or melting SUMIKASUPER LCP do not come in contact with the eyes or skin or are inhaled. In addition, be careful not to touch the resin while it is still hot. Local ventilation equipment must be installed and proper protective gear (such as protective goggles and protective gloves) must be worn while drying or melting this product. [2] Flammability SUMIKASUPER LCP is a ame-resistant material (classied as UL94 V-0), however, it should be handled and stored in places well away from sources of heat and ame. If the material catches re, toxic gases may be released. Use water, foam, or chemical re extinguishers to extinguish any ames. [3] Disposal SUMIKASUPER LCP may be disposed by burial or incineration. Burial of the material should be conducted by certied industrial waste processors or by the local municipal authorities in accordance with the Waste Management and Public Cleansing Law. Incineration should be conducted using a furnace which complies with the laws and regulati