监视器的常见问题（Common problems with monitors）.docVIP

监视器的常见问题（Common problems with monitors） Whats the difference between a monitor and a TV? Why cant televisions be used as monitors? The monitor is functionally simpler than the television, but requires more performance than the TV set. The main difference is reflected in the three degrees. One is the image definition: the traditional TV reception is RF television signal out of the video image, the corresponding signal bandwidth is usually less than 6M, so the definition is usually greater than 400 TV lines, the image definition monitor has high requirements, so the professional monitors in the channel circuit than the traditional TV should have bandwidth compensation and improve the circuit, the wider passband, a higher resolution image. The two is the color reduction degree, if the definition is mainly determined by the amplitude frequency characteristics of the video channel, the degree of reduction is mainly composed of a monitor in the red (R), green (G) and blue (B) determined by phase luminance and chrominance signals of three color signal. The monitor is usually observed as a static image, and to monitor the color reduction degree requirements are higher than the television, so the video monitor professional channel in brightness and color processing, G, B and R should be treated with precise compensation circuit and a delay circuit, to ensure that the light / phase color signal and R, G B, signal synchronization. The three is the stability of the monitor in the form: closed-circuit monitoring system, usually requires 24 hours a day, 365 days a year electricity uninterrupted use (and usually work only a few hours a day TV), and some application environment monitor may be more severe, which requires higher reliability and stability of the monitor. As compared with TV, in the design, monitor current, power consumption, temperature resistance and electrical interference, electric shock and capacity margin and the average time between failures are much larger than