The NC Machining PostProcessing Technology （数控加工后处理技术）.pdf

International Journal of Science and Research (IJSR), India Online ISSN: 2319-7064 The NC Machining Post-Processing Technology Based on UG Sharifa Magambo1, Liu Ying 2 Tianjin University of Technology and Education Department of Mechanichal Manufacturing and Automation, Tianjin,China Abstract: Post-processing technology is the key to CNC automatic programming technology and an important module of the CAD / CAM system. Post-processing technology converts the NC program that is produced by the CNC automatic programming tool into the file that can be identified by CNC system. Moreover, the generated tool path files must match with the CNC system. Post-processing techniques and UG software are briefly introduced. Using them, a post-processor for FANUC CNC systems is created. The program that generated by the special processor is contrasted with the general processor. The results illustrate that using the dedicated post-processor in engineering applications can improve programming efficiency and processing reliability. Keywords: UG CAM; UG/Post; Post Builder; FANUC NC System 1. Introduction realizes the development of UG/Post, which is an explanation type computer language which is developed by John K.O The main task of NX post-processing is to convert the usterhout. There are two approaches: manual programming machining tool path source file generated by UG CAM into and Post Builder. the NC code files that NC program can be identified by CNC system and machine tool, so this process is an important link Post Builder is the tool provided