Therminator Owners ManualV8 Blichmann （Therminator所有者ManualV8 Blichmann）.pdfVIP

Therminatortm Operation, Assembly Maintenance Manual Congratulations on your purchase, and thank you for selecting the TherminatorTM brand stainless steel wort chiller from Blichmann Engineering. We are confident that it will provide you years of service and TM many gallons of outstanding beer. This manual will familiarize you with the use of the Therminator , assembly, and sanitation procedures. **** PLEASE READ THOROUGHLY PRIOR TO USE FOR IMPORTANT SAFETY INFORMATION **** IMPORTANT !! Warning: Sections labeled “Warning” can lead to serious injury or death if not followed. Please read these thoroughly and understand them completely before use. If you do not understand them or have any questions, contact your retailer or Blichmann Engineering (www.BlichmannE) before use. Caution: Sections labeled “Caution” can lead to equipment damage or unsatisfactory performance of the equipment. Please read these sections thoroughly and if you have any questions, contact your retailer or Blichmann Engineering before use. Assembly: Threaded fittings The TherminatorTM utilizes ½” NPT (National Pipe Taper) male threads for the wort side of the exchanger (top fittings on the back and front of the exchanger) that will readily mate up with your preferred type of hose connector. The cooling water side of the exchanger (bottom fittings on the back and front of the exchanger) is fitted with ¾” male garden hose threads (GHT). High quality hose quick connect fitting adapters from Blichmann Engineering are available through your retailer. Caution: If you are using stainless NPT adapter fittings on the wort side of the exchanger (½” NPT) it is necessary to use a thread sealing tape (TeflonTM type) to prevent thread galling (welding), whi