TRIADTM01 Shielded Subminiature Circular （TRIADTM01屏蔽超小型循环）.pdf

Shielded Circular Subminiature Connectors (TRIAD™ 01) Product Line Information TRIADTM01 Shielded Subminiature Circular Connectors Product Facts • Small and lightweight, shielded round connector system • Panel mount PCB versions - 180° and 90° • Panel mount - Solder Cup - 180° versions • Field serviceable male and female connectors--crimp and solder version--for on site connections • Single and double ended overmoulded cable leads are available • Customized assemblies are possible to make upon request • Components for BUS applications available Description Where shielding is a requirement in medical or industrial applications there will be the use of TRIADTM01 a good decision. The small and lightweight system is available as panel mount headers with solid posts 180° and 90° for soldering on PC boards and also with solder cups for wire termination. The PCB version has two board locks and the solder cup version has two solder tabs for grounding. Through the three O-ring design on the panel mount connectors and in connection with the over- moulded cable assemblies, TRIADTM01 is a liquid and dust tight system according to IP65 protection class (DIN 40050). The reasonable shielding, the small diameters, the over-moulded connector with cable and the use of metallic parts makes TRIADTM01 also useable in harsh environments such as a factory where TRIADTM01 can be used in BUS applications such as CAN or MODULAR too. Components such as T-Adapters and terminator plugs with a resistor are also available in different colors upon request (e.g. yellow and purple). Specifications Shell Protection Class (nested condition): IP65 acc. DIN 40050 Temperature Range: -40°C to +85°C Mating Cycles: ≤500 Test Voltage: 625 V AC Operating Voltage: 60 V AC Contact Resistance: 6 m ohm Interlock: Screw Type