Type 1051 and 1052 Diaphragm Rotary Actuators（1051年和1052年隔膜扶轮致动器类型）.pdfVIP

Product Bulletin 61.1:1051 April 2005 1051 and 1052 Actuators Type 1051 and 1052 Diaphragm Rotary Actuators The Type 1051 and 1052 spring-return diaphragm installation of a broad range of options: limit rotary actuators (figure 1) operate splined shaft switches, position indicating switches, positioners, rotary valves, such as the edisc (Type 8510B and and manual over-rides. Option applicability varies 8560), Types 8532 and 9500, eplug (Design with actuator size. Refer to the specifications table BV500, CV500 and V500) and Vee-Ball (Design and table 4 for information concerning option V150, V200 and V300) valves. Types 1051 and applicability and specifications. 1052 actuators are both suitable for on-off service or for throttling service. The primary difference between Note these actuators is that the Type 1052 actuator has a spring adjuster (see figure 2) which means it may be Neither Emerson, Emerson Process used with or without a positioner, depending on Management, nor Fisher assume service requirements. The Type 1051 actuator, in responsibility for the selection, use, or throttling service, is normally equipped with a valve maintenance of any product. positioner. Refer to separate bulletins for valve and Responsibility for proper product positioner information. selection, use, and maintenance of any Fisher product remains solely with the Both actuator types are designed for easy purchaser and en