电压互感器的高频无源电路模型.pdfVIP

20 12 年 4 月 电 工 技 术 学 报 Vol.27 No. 4 第 27 卷第 4 期 TRAN SACTION S OF CHINA ELECTROTECHNICAL SOCIETY Apr . 20 12 电压互感器的高频无源电路模型 张重远 徐志钮 律方成 杨彬 （华北电力大学河北省输变电设备安全防御重点实验室 保定 07 1003） 摘要 提出了一种获得微观 源的PT 高频模型方法，该方法首先利用矢量拟合获得 Foster 形式的网络函数稳定的表达式，然后利用起作用集方法求解带约束条件的二次规划获得 满足 源的Foster 形式的网络函数，最后综合获得微观 源的电路模型。根据 源修正前后网 络函数的对比验证了本文所提方法的有效性。 关键词：电压互感器 高频电路模型 电路综合 微观 源 起作用集方法 中图分类号：TM63 High Frequency Passivity Circuit Model of Potential Transformers Zhang Zhongy uan X u Zhiniu L ü Fangcheng Yang B in （Hebei Provincial Key Laboratory of Power Transmission Equipment Security Defense North China Electric Power University Baoding 07 1003 China ） Abstract Very fast transient overvoltage generated in gas insulated substation(GIS) will introduce into secondary by potential transformer (PT), and which will affect secondary equipment, so it must be analyzed. PT circuit model according to measured frequency domain network function could be implanted into EMTP or PSPICE, but if the model has active element, then the simulation maybe unsteady . For solving the problem, a method to obtain PT high frequency microscopic passivity circuit model is proposed. First, the method uses vector fitting to obtain steady Foster formula, and then active set method is used to solve quadratic programming with constraint to obtain passive Foster formula. At last, a circuit synthesis method for rational functions is applied to build microscopic passive circuit model. The effectiveness of the method is verified by the comparison of network function before and after passive adj ustment . Keywords ：Potential transform