WHAT’S HAPPENING IN SURFACE …（在表面发生了什么u2026）.pdfVIP

2011 WJTA-IMCA Conference and Expo September 19-21, 2011 ● Houston, Texas Paper WHAT’S HAPPENING IN SURFACE PREPARATION STANDARDS FOR PAINT Lydia M. Frenzel Advisory Council San Marcos, TX U.S.A. ABSTRACT The first association standards for the use of waterjetting cleaning in surface preparation were released in 1994 by Society for Protective Coatings (SSPC, Pittsburgh PA) and NACE Int. (Houston, TX). Since that time, the standards have been revised within the US; and ISO has published standards. The latest release for SSPC and NACE is due to come out in 2011. This paper will highlight the changes- what was; what is to come, and what prompted the changes. ® ® Organized and Sponsored by WJTA - IMCA 1. INTRODUCTION This paper is divided into three topics found in waterjet cleaning surface preparation documents: Visual, Flash Rust, and Non-Visible (Salts). There have been remarkable few failures reported to the author starting in the early 1990’s on coatings placed over waterjet cleaned surfaces. However, there have been many subtle attempts to malign waterjet cleaning or to make it so complicated in containment as to force an economic hardship. Joint Surface Preparation Standard NACE NO. 5/SSPC-SP 12 “Surface Preparation and Cleaning of Steel and Other Hard Materials by High- and Ultrahigh-Pressure Water Jetting Prior to Recoating” is the standard document for the America