adsl配置详解（ADSL configuration detail）.docVIP

adsl配置详解（ADSL configuration detail） Detailed ADSL configuration.Txt cable as many people earned the youth live sometimes touching is not worth mentioning things. Are broken is not the most cruel and most cruel is stepping on these fragments but pretended not to find the stubborn pain if I meet again how perfect people are the future, there is a disadvantage, he is not you, _____ next life to be male, marry a girl like me. Router access detailed ADSL configuration, ADSL modem 1 Cisco router PPPoE configuration: Description: the case of Beijing Telecom ADSL PPPoE access requires the use of a ADSL modem and a Cisco 2500 router (Dual Ethernet port), IOS 12.2 (15) T, can realize the local area network to share Internet access. This configuration is the case is divided into 7 steps: the first step: the configuration of VPDN VPDN e Router access ADSL configuration detail 1, the Cisco router connects the PPPoE modem configuration of ADSL: Description: this case for Beijing Telecom ADSL PPPoE access, you need to use an ordinary ADSL modem and a Cisco 2500 router (double Ethernet), IOS 12.2 (15) T, LAN sharing can achieve Internet access This case configuration is divided into 7 steps: Step 1: configuring VPDN VPDN enable (virtual private dial-up network enabled router ---vpnd) Vpdn-group Office (building a VPDN group) Request-dialin (initializes a VPND tunnel and creates a VPDN subgroup that requests the dial in) Protocol PPPoE (VPDN subgroup uses PPPoE to build session tunnel) The second step: configuring the router to connect to the interface of ADSL modem Interface Ethernet1 No IP address The PPPoE enable allows the Ethernet interface to run PPPoE Pppoe-client dial-pool-number 1 adds the PPPoE dial client of the Ethernet interface to the dial pool 1 The third step: configuring the logical dial interface: Interface Dialer1 The IP address negotiated dynamically negotiated the IP address from the ADSL service provider IP NAT outside enables NAT for this interface Encapsulati