cad随层bylayer随块byblock详解（CAD随层-随块详解从未改变）.docVIP

cad随层bylayer随块byblock详解（CAD随层-随块详解从未改变） In the 1 and CAD2004 object properties, what does ByLayer mean with the layer ByBlock and block? 1) bylayer is an English phrase, meaning following the layer. Use of CAD drawing, a very important feature is the layer, tongsudejiang, like a layer of overlap in the transparent paper together, a transparent paper is a layer, we will be drawing graphics on transparent paper, graphics or different graphical elements can be drawn in different layers (if you like). The layer contains many features, such as line type, color, line thickness, print style, and so on, which can be set by layer manager. When drawing the graphic elements, if the graphic elements type, color, thickness, print style specified as bylayer, graphic elements painted with characteristics of the layer set, of course, you can also specify the graphic elements for other characteristics, it is designated as type except bylayer. 2) for example assumes that the JMD layer, color is red, a color line of the layer is bylayer, then the line color is red, but also with the JMD layer of color change; if it is set to byblock, the color is white, does not have any relationship with the color change. 3) that is, the line and color of the layer you are currently selecting is the initial line and color of the bylayer. Byblock same solution. 4) by layer according to the layer mean, by block is based on the block mean. I understand this, for example, a block, select it, if the color or line width is set to by layer, the characteristics of it with the color and width of the layer where (in advance set the Layer Properties Manager in); if set to by block, and its characteristics will set in the block in (on the block editor can see). Of course, if it is for a normal line (non block), it is the same as by layer or by block because there is no block 5) bylayer: if you select bylayer, color graphics, and the properties of layer manager settings like byblock: This applies only to the bloc