xp修改建议（XP change proposal）.doc

xp修改建议（XP change proposal） 1. turn off the automatic send error reporting function Click Start / control panel / system / advanced, click the error report button, and then select disable error reporting, the following but notify me when a serious error occurs can be selected. 2. reasonable set of virtual memory Enter the control panel / system / advanced / performance / settings / advanced / virtual memory / change to the virtual memory settings window, you first determine the page file in which drive letter, and then the other drive driver disable all page file. It is recommended that you set it to other partitions instead of the default system, so that you can increase the read and write speed of the page file and help the system run quickly. According to Microsoft, the page file should be set to 1.5 times the memory capacity, but if your memory is relatively large, so that the occupied space is also very impressive, and that if the memory capacity is below 256MB, is set to 1.5 times, the maximum and minimum value, if the above 512MB, half set the memory capacity is completely feasible. 3. clean up junk files You can use Windows search function to find these files, and then delete them. The default WindowsXP error event record in the event of a system failure, and write debugging information, the file information we can completely abandoned. Method is to click Start / control panel / system / advanced / start and fault recovery, empty the write events to log files, in write debugging information drop-down box, choose no can. 4. change the IE temporary folder Many temporary files generated on the Internet are stored in the IE temporary folder. By default, the temporary folder is on the system partition, and a large number of temporary files will affect the performance of the hard disk read and write system files. You can change the location of temporary files to avoid this situation. The method is to click start / /Internet control panel options in the general tab,