xp的安装步骤（Installation steps for XP）.doc

xp的安装步骤（Installation steps for XP） 1. When the computer starts, please Windows XP Professional CD (Installation CD) in the CD ROM, the screen will appear after the inspection system in Press any key to Boot from CD..., this time you have 5 seconds you can press any key to start the installation, if you missed it, the system can be restarted repeat this step. 2. The system will start reading CD program, read CD all need driver, this time, if your hard disk is SATA or you are using the RAID system, press F6, because the system needs to notify you in the use of special hard disk, the new driver needs to identify Windows floppy disk, because XP itself does not directly support these systems. 3. If you press F6, after you read all the drivers in the system, youll be asked to put floppy disks with SATA or RAID drivers and select the correct drivers from the directories that appear. 4. If you are using the ATA hard disk, neither the second nor the third step is required. When all necessary drive reads, the Windows XP installer displays the welcome screen. Press Enter to continue. 5. Please press F8 to accept the software agreement. 6. If you already have a Windows XP operating system on your hard disk, the installer will ask you if you want to fix the old system, press the Esc button, do not repair, and continue installing. 7. The system then displays any available C (partition) that can be installed with Windows XP. If your hard disk is newly purchased and there are no hard disk partitions, press the key button to create a new hard disk partition. You can also defragment all your hard disk partitions at this time, delete the hard disk partition, and create a new hard disk partition. Heres a suggestion that youd better build at least 2 hard disk partitions, because one of them can be used by the system, and the other one can be used for storing common articles, games and building virtual memory. This is faster and easier for future Defragamenting harddisk. P/S: if you are