工程材料复习提纲（Engineering materials review outline）.doc

工程材料复习提纲（Engineering materials review outline） Fill in the blanks: The 1. density refers to the material in ____________ state, mass per unit volume; apparent density is in the material quality _______ state per unit volume. 2. the strength of the material depends mainly on the structure and structure of the material itself. 3., the material deformation under the action of external force, if the external force is canceled, still maintain the shape after deformation, size, this can not be lost deformation, known as. 4. water resistance material with softening coefficient, usually greater than _____ softening coefficient of material can be considered waterproof. The definition of thermal conductivity of the materials is 5. units: the thickness of the material, when the temperature difference between the two sides is _____, through heat per unit area in unit time. 6. slag Portland cement is indicated by code number. Composite Portland cement is indicated by a code number. 7. according to the geological conditions of different rock formation, _______ rock can be divided into three categories, ________, _______. 8., the composite material, which is made of ordinary concrete and is made of various kinds of fibers, is called fiber concrete. The adding of fiber to improve the concrete ______ and ______, to prevent or reduce cracking. High ____ element content in steel 9., easily lead to brittle steel in __________ temperature range, this is called cold brittleness of steel. 10. common uses steam curing of concrete, can improve the strength of concrete _________, but not necessarily improve the strength of __________. 11. wood is susceptible to _______ and _______ infringement become bad. 1. large volume concrete project should be used _____________ cement. In the production of 2. building ceramics, according to the degree of sintering body can be divided into ________, ________, _______ three categories. Less than 5% of Magnesium Oxide content 3. lime, lime as _____ said, M