具体电路设计.docVIP

本科毕业论文 陈俊宇 200931120102 指导教师 徐海涛 讲师 学院名称 理学院 专业名称 电子信息科学与技术 论文提交日期 2013年4月17日 论文答辩日期 2013年5月20日 摘 要 LED照明即发光二极管照明，是一种半导体固体发光器件。它是利用固体半导体芯片作为发光材料，在半导体中通过载流子发生复合放出过剩的能量而引起光子发射，发出光。LED照明产品就是利用LED作为光源制造出来的照明器具。关键词：LED power factor adjustment research Chen junyu (College of Science, South China Agricultural University, Guangzhou 510642, China) Abstract: LED lighting is a light emitting diode (LED) lighting, is a semiconductor light-emitting solid device. It is the use of the solid semiconductor chip as the light emitting material in the semiconductor by carrier recombination occurs to release excess energy caused by photon emission, and finally emits light. LED lighting products is the use of LED as a light source created by the lighting apparatus. This article is based on the basic theory of the LED power factor LED power factor adjustment. First, theoretical description and explanation of the LED power factor, and then describes a method to increase the power factor correction circuit, and finally analysis of the role for the entire system in a power factor correction circuit power factor regulation in different circumstances, and production efficiency graphs to visually reflect the benefits of higher power factor. The present study, the use of chip HV9910 achieve the control of the LED lamp, the front end directly connected to AC mains, and full bridge rectifier circuit, the filter circuit as well as a passive harmonic filter by the current circuit to achieve a power factor regulation. Finally, multimeter, power meter measurement of the actual circuit to calculate the important parameters such as power factor and efficiency, making tables and graphs to analyze the relationship of power factor and efficiency. Key words: LED lighting power factor correction circuit the HV9910 passive harmonic filter by the current circuit目 录 1 前言 1 1.1课题的研究背景 1 1.2 LED照明的优点…. 1 1.3提高LED功率因数的好处……. 2 1.4提高LED功率因数的方法……. 2 2基本理论 2 2.1 LED功率因数…