5d20机芯故障（5d20 movement failure）.docVIP

5d20机芯故障（5d20 movement failure） 5D20 movement related maintenance experience and meta change Standby (34SDDP, 29TJDP, said: R621 (29TIDP) between 1 and 2 feet.) and a 3.3K /0.25W resistance welding. Color flash (34SDDP) 1): digital plate Y2 (20.25MHz) change. 2): D312 to 2DTV32 power supply board. Red screen (May 30, 2001 before the production of machines): digital plate C5 and a 1500PF/50V or 1000PF/50V capacitor. VGA Red Square: C135 digital parallel board capacitor 0.1uF. According to the program, the key / sometimes jump three channels: the replacement of CPU. STV9379 bad cause will be changed to C362: three 500V disk capacitor. Cold start difficulties: the replacement of C954 (reset). AV color, DVD in any standard no color. After the image to the right 2: turntable three cm, color according to the video switch after normal: 1: the movement of the input signal to the more stringent requirements of AV, when the DVD is connected to a plurality of televisions, no color difference caused by the load capacity. 2: adjust the data line, N is adjusted properly, forced N to search, repeatedly switching. Sound off: (29TFDP 29TJDP) and Taiwan for two reasons: one: process quality problem. (C108 hit the sound shell, separately can solve the circuit design problem: two). 1): the resistance of R104A to 3.3K ohm /0.25W resistor, capacitor C104A to 15nF polyester film capacitors, CF103 filter to 6.5MHz. 2): R104A C104A and R104 disconnect, and fly line to IC451 55 feet. 3): SERVICE OPTION2 DK in the plant data of HDEV from OFF to ON. 4): after the change will be forced sound in DK. 5): replacement of software has changed a new version of the CPU and MSP3410 special block. 3410 (or 36, 37 off, by 33, 34 feet a try. Note: the connection with 4.7 mu F/50V). The application of difference between ST92196A and ST92196B: crystal and capacitors C952, C953, ST92196A 82P, ST92196B 20P Dont stop with remote and ineffective phenomenon of C119 can be cancelled. 1, each boot has no grating m