iozon集群（iozon集群）.docVIP

iozon集群（iozon集群） The use of SSH as a Iozone cluster configuration testing technology 1) the default Iozone cluster test using RSH, and the current RSH basically has been replaced by SSH, so you need to configure SSH as the default RSH, is actually very simple, is the environment variable RSH or RSH is set to SSH, export RSH=ssh; export rsh=ssh. Under the tcsh need to use the setenv command set 2) configure the SSH without password, please refer to set the SSH server only by key authentication, a simple point is divided into two steps, A) ssh-keygen -t RSA (SSH for Version2) B) ssh-copy-id -i.Ssh/id_rsa.pub username @ target machine name 3) cluster node set iozone test files, including IP address (machine name), file system, Iozone path testing, for example: Cloud01 /mfs /usr/bin/iozone Cloud02 /mfs /usr/bin/iozone 4) run the iozone test program Iozone -i 0 -i 1 -r 512 -s 4G -Recb /tmp/log.xls -t -+m /tmp/nodelist -C |tee /tmp/iozone.log 2 Among them: I is 0 write/rewrite -i 1 read/reread -r file block size The -s test file size The number of nodes -t The -+m node configuration file -C showed that the per node throughput -R EXECL format output log -e flushing time -b will have a EXECL binary log file name The -c test file including the closing time The test will generate each node in the /testfs packet, the test is completed in iozone.log will see each node of the read and write speed, maximum speed, minimum speed, average speed and throughput Iozone test NFS aggregate bandwidth The use of iozone testing procedures are as follows 1. on the server node to install iozone, can download the corresponding software package. #rpmivh iozone-3-226.rpm 2. copies of the iozone server node to all the nodes under /tmp, including server node #cp /opt/iozone /tmp #rcp /opt/iozone node1:/tmp The node1 /opt/iozone copy machine /tmp 3. on the server node #cp /opt/iozone /root 4.vi /root/nodelist Format: The working file system path node name or IP iozone test iozone The following: No