mdfl 2（mdfl 2）.docVIP

mdfl 2（mdfl 2） The characteristics of all kinds of coal Chinese coal classification in national standard China standard coal classification of newly developed countries, according to the degree of coalification of coal, coal will be all divided into lignite, bituminous coal and anthracite. For lignite and anthracite, respectively according to the characteristics of the degree of coalification and industrial use is divided into 2 and 3 categories. Bituminous part more than 10 to 20%, according to the volatilization of more than 20 ~ 28%, more than 28 ~ 4 stages 37% and greater than 37% is divided into low, medium and high and high volatile bituminous coal. About coal bonding, according to bond index G: 0 ~ 5 is not to distinguish between bond and micro caking coal. More than 50~65 medium to strong caking coal, more than 65 is strongly caking coal. For the strong caking coal, and the plastic layer maximum thickness of Y is greater than 25mm or AoYa dilatation b greater than 150% (for Vdaf more than 28% bituminous coal, b greater than 220%) of coal as strong caking coal. So, in the coal, can be divided into 24 units, and is represented by the corresponding digital. The ten digit number, from 1 to 4 on behalf of the coal rank, the number of digits in 1 to 6, said the caking property of coal. In the 24 units, according to the similar coal properties are similar, different coal properties have different classification principles will be part of the unit into 12 categories. Then named types of coal, taking into account the new classification of the continuity and habit of name, still retain the gas coal, fat coal, lean coal, lean coal, and weak caking coal, non caking coal and long flame coal 8 coal. In order to make the same kind of coal properties are basically the same, the new national standard for classification of coal increased 4 over coal, lean coal, 1/ 2caking coal and 1/3 coking coal and gas coal. Refers to the poor adhesion of lean coal of lean coal, which is di