s1240简要命令（S1240 brief command）.docVIP

s1240简要命令（S1240 brief command） The structure of S1240 system The functional structure of A1000 S12 is very simple, it consists of an internal exchange network and connected to a network of different modules. The module type and quantity depends on the exchange capacity and provide services. The internal exchange network (also called digital exchange network, referred to as DSN) exchange unit is connected by a series of according to the topology structure, and increase the number of traffic module growth, will cause the DSN exchange series and the increase of the number of planes. On the other hand, all the modules are connected to the DSN. module all contain the same part of a structure control unit through the PCM link (CE), the control unit comprises a microprocessor and memory and a switching network connection standard interface. The control unit (CE) is usually divided into two categories: the terminal control unit (TCE) and an auxiliary control unit (ACE). The terminal control unit (TCE) with a standard interface that is connected with the terminal circuit module has a specific function of the interface, such as user circuit, relay circuit. An auxiliary control unit (ACE) does not contain any terminal circuit, mainly used for some special tasks, such as error handling, word analysis, the user identification Bureau crown. Here are some of the major A1000 S12 module: Analog subscriber module (ASM) that consists of a control unit and a group of users to provide analog user circuit, an excuse. Simulation of those users can support different types of circuit (ordinary users, through public telephone users, coin priority users etc.). In addition, there are integrated services digital network (ISDN) user module, mobile communication user module etc.. Digital trunk module (DTM): a control unit (CE) and digital relay circuit. Through the PCM link standard, digital relay module and external system as an excuse, as: exchange, exchange, remote subscriber unit etc.. Digita