ts题库（TS question bank）.docVIP

ts题库（TS question bank） ISO/TS 16949:2002 knowledge database The first part: RadioButtonList 1, (A) and workplace standards. A) workshop of the actual situation of B) ideally C) other workshop requirements D) personal requirements 2, the severity is to assess which of the following conditions: (C) A) the frequency of occurrence of potential failure mode B) detection of potential failure modes C) effect of the potential failure modes The risk priority number RPN D) 3, the reason of failure in the description of what is appropriate (A) A) seals installed top down B) operator error C) equipment fault D) according to the instructions 4, the preparation of PFMEA is based on: (A) A) process flow chart B) risk assessment The C control plan) D) histogram 5, the LPA audit is (D) All the process of A) B) products C) personnel D) process and process identification D) requirements 6, the quality of the products is the standard (B) transmitted to the operating staff of production line The A control plan) B) SOS/JIS C) drawing process. D) PFMEA 7, the PCR report is a comprehensive statement on an issue all relevant facts, it helps us to explain the problem occurred (E), the root cause of the problem. A) time B place) C) the definition of the problem The scope of the problem of D) E) all of the above 8, responsible person at the completion of the PCR report (D), should be signed by relevant leaders at all levels. According to the Department of manufacturing area or regional department approval bar. A) lead department B) primary responsibility department C) the new responsibility department D Department) 9, all the short-term solution, there must be responsibility for the implementation of the breakpoint information and current short-term measures to implement the state. The term shall be completed within (B). A) 12 hours B) 24 hours C) 48 hours D) 72 hours 10, all the long-term solution, there must be responsibility for the implementation of the information, and the measures for th