SMAJ5.0-440系列型号.pdfVIP

Transient Voltage Suppressors Diodes Surface Mount - 400W SMAJ5.0~440CA Series The SMAJ Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features SMA/DO-214AC unit:inch(mm) • Halogen-free • Rohs compliant • Typical maximum temperature coefficient ΔVBR = 0.1% x VBR@25°C x ΔT • Glass passivated Chip junction in DO-214AC package • 400W peak pulse capadility at 10×1000μs waveform, repetition rate(duty cycles):0.01% • Fast response time:typically less than 1.0ps from 0 Volts to BV min • Excellent clamping capability • Low incremental surge resistance • Typical IR less than 5μA above 11V • High temperature soldering guaranteed: 260°C/40 seconds / 0.375”,(9.5mm) lead length, 5lbs., (2.3kg) tension • Plastic package has underwriters laboratory flammability classification 94v-0 Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom,computer, industrial and consumer electronic applications. Maximum Ratings And Characteristics (TA=25°C unless otherwise noted) Rating Symbol Value Units Peak Pulse Power Dissipation at TA=25°C by P 400 Watts 10x1000μs waveform (Fig.1)(Note 1), (Note 2) PPM Power Dissipation on infinite heat sink at TA=50OC PD 3.3 Watts Peak Forward Surge Current, 8.3ms Single Half IFSM 40 Amps Sine Wave (Note