数字温度计硬件电路的实现-单片机教程网.docVIP

编 号： 审定成绩： 重庆邮电大学 毕业设计（论文） 设计（论文）题目： 学院： 学 生 姓 名 ： 专 业 ： 班 级 ： 学 号 ： 指 导 教 师 ： 答辩组 负责人 ： 填表时间：20年 6月 重庆邮电大学基本范围-50℃-110℃，精度误差小于0.5直读显示主要包括硬件电路的设计系统程序的设计。DS18B20温度传感器，用LCD液晶1602作为显示器。其次，系统软件程序包括主程序，温度值读取、转换及计算程序，显示数据刷新程序等。 该温度计整体功能的实现是通过温度传感器DS18B20采集温度信号送该给单片机处理，单片机再把温度数据送液晶显示器1602显示。 【关键词】DS18B20 LCD液晶显示器 ABSTRACT As the modern industrial and agricultural technology development and peoples living environment of increased demand, people in many aspects of life have a right temperature sensing and control needs. And the traditional thermometer for various reasons, can not achieve the accuracy of the results we expected, with modern microelectronics and the development of information science, digital thermometer thermometer undoubtedly become the most effective design programme. This paper describes the digital thermometer which is consisted of the central controller, temperature detectors, monitors and police components.The thermometer’s basic range is from -50 ℃ to 110 ℃,its accuracy error is less than 0.5 ℃ and LCD directly shows numerical temperature. When the measured temperature exceed the limit alarm doors, the system will output alarm signal. The paper includes tow aspects of the design: one is hardware circuit design, the other is the system process design. Among them, the hardware components are as following: the central controller SCM AT89S51,the temperature detection DS18B20 part of a temperature sensor,and LCD monitors, as LCD 1602 F; the system software programs, including the main program, the temperature reading, conversion and calculation procedures, the data show that refresh procedures and so on. Temperature Sensor DS18B20 acquisition of the temperature signal sent to SCM for processing, SCM then the temperature data sent 1602 F LCD display. 【Key words】SCMtemperature sensor DS18B20 LCD liquid crystal display