园林工程（Landscape Engineering）.docVIP

园林工程（Landscape Engineering） Fill in the blanks 1. methods of planting trees and shrubs are divided into _______ planting method and planting method of two kinds of _______. Bare root and soil ball 2, at least _______ artificial pond water mouth _______ mouth and mouth _______. Influent, drain (drain), overflow 3, map two vertical height difference between adjacent contours is _______ horizontal distance is _______. Equal distance and leveling distance 4, digging planting seedlings, and Anaguchi on the bottom shall be _______ shaped, and _______. Round, consistent in calibre 5, _______, _______ garden drainage way _______ and _______. Surface drainage, ditch drainage, pipe drainage In 6, large trees should be planted after the _______ _______ in 24 hours. Water and prop up 7, combined with the building at the corner of the two kinds of rocks called _______, _______ layout techniques. Angle and corner The 8. main methods of terrain design are _______, _______ and _______. Contour method, section method and model method 9, the general water garden pond water depth can be designed for _______ meters. Zero point seven The soil ball 10, seedling height of 2 meters above the shipment, seedlings should be oblique or flat, _______ forward backward _______. Soil ball, trunk 11, garden trees planted in three ways _______ planting, planting, planting _______ _______. Transplanting, transplantation, colonization There are 12. basic types of road _______, _______ and _______. Cut type, embankment type, special type Two kinds of rocks arranged 13. methods and building entrances combination called _______ _______. Stomp and crouch 14. earthwork construction including _______, _______ _______ _______ digging, transportation, filling, pressure 15, water fountain at least _______, _______, _______ and _______. Water inlet (water inlet), outlet (drain), overflow port, suction port 16, usually said the rockery includes two parts, _______ _______. Rockery and stone carving There are at l