三维地应力BWSRM测量新方法.doc

三维地应力BWSRM测量新方法 及其测井机器人在重大工程中的应用 葛修润1，2，侯明勋2 (1. 中国科学院武汉岩土力学研究所 岩土力学与工程国家重点实验室，湖北 武汉 430071； 2. 上海交通大学 岩土力学与工程研究所，上海 200240) 摘要：地壳上层岩体的应力状态是地壳最重要的性质之一，获取岩体应力状态最直接、可靠的手段是原位地应力测量。首先简要回顾地应力测量的研究历程及其发展现状，分析岩石力学与工程中常用的几种地应力测量方法和技术。重点介绍钻孔局部壁面应力解除法(BWSRM)这一新的三维地应力测量方法的原理，以及基于BWSRM的地应力测井机器人研制过程和具体实施步骤。最后给出地应力测井机器人在锦屏水电站埋深达2 430 m处科研试验洞内的试验结果。研究表明，测点位置的围岩地应力以水平主应力为最大主地应力，而接近竖直方向的地应力分量则为最小主地应力；第一和第二主应力量值比较高，而且两者量值也比较接近。 关键词：岩石力学；地应力；三维地应力测量；应力解除法 中图分类号： 文献标识码：A 文章编号：A NEW 3D IN-SITU ROCK STRESS MEASURING METHOD：BOREHOLE WALL STRESS RELIEF METHOD(BWSRM) AND DEVELOPMENT OF GEOSTRESS MEASURING INSTRUMENT BASED ON BWSRM AND ITS PRIMARY APPLICATIONS TO ENGINEERING GE Xiurun1，2，HOU Mingxun2 (1. State Key Laboratory of Geomechanics and Geotechnical Engineering，Institute of Rock and Soil Mechanics，Chinese Academy of Sciences，Wuhan，Hubei 430071，China；2. Institute of Geotechnical Engineering，Shanghai Jiaotong UniversityShanghai 200240，China) Abstract：It is important to conduct a research on the stress state of the rock masses in the upper earth′s crust. In-situ rock stress measurement is the basic and reliable access to obtain the stress state of the rock masses. The development of in-situ rock stress measurement and state-of-art of research on it are overviewed. Then，several in- situ rock stress measuring methods and techniques are briefly analyzed in rock mechanics and engineering. A new method，borehole wall stress relief method(BWSRM) to determine the insitu 3D rock stress tensor in a single drilled borehole is deliberated. An original geostress measuring instrument typed by BWSRM-H01 is designed and manufactured based on the principle of in-situ rock stress measurement with BWSRM. The in-situ test for rock stress with BWSRM is carried out at an experimental tunnel in Jinping II hydropower station，China，where the buried depth of overburden is about 2 430 m. It is shown that the two principal stress components close to the horizontal direction are the maximum